Product Description
Made in Japan
Spec/Material
- Material: Special tool steels (Kobe Steel, Ltd)
- Length: about 120mm
- Weight: about 60g
- Hardness of the edge: More than HRC58
- Single- edged structure
- Blade stopper to prevent chipping
- Pin for preventing opening excessively
- Spring structure
- Soft grips
- Original nipper cap is included
- Cutting capability
- Cut plastic only (polystyrene, polypropylene, acrylonitrile-butadiene-styrene, and PE plastic) .
- Cutting capacity: Limited under 3mm
- *Transparent and semi-transparent PS resin is difficult to cut, so it is limited to under 1mm.
For people who build plastic models, this is the best nipper to use because when they cut along the edge, it leaves no remains of the gate. It leaves with a clean cut section. This shortens the time spent on filing the gate.
Ultra-thin “cutting blade” by craftsmanship
The GodHand Ultimate Nipper GH-SPN-120 can cut translucent plastic up to 1mm. The single edged cutting blade is slightly designed for mirco precision cutting in mind. Due to the design of the nippers, it is recommended the following: To not use excessive force when cutting. Cut as close to center of the blade as possible. Do not twist the blade while cutting or during releasing the blade. Do not cut if it doesn't fit within the length of the blade.
